Pojedyncze stoły nożycowe z obrotową platformą serii Green Line 1E
| A1.05.E000R | 450 | 590 | 1.000 x 800 | 260 | 0.55 | 1 | 60 | 10 |
| A1.05.E010R | 450 | 800 | 1.250 x 800 | 260 | 0.55 | 1 | 60 | 13 |
| A1.05.E020R | 450 | 800 | 1.250 x 1.000 | 260 | 0.55 | 1 | 60 | 13 |
| A1.05.E030R | 450 | 1000 | 1.500 x 800 | 280 | 0.55 | 1 | 60 | 20 |
| A1.05.E040R | 450 | 1000 | 1.500 x 1.000 | 280 | 0.55 | 1 | 60 | 20 |
| A1.05.E050R | 450 | 1200 | 1.800 x 800 | 300 | 0.75 | 1 | 60 | 22 |
| A1.05.E060R | 450 | 1200 | 1.800 x 1.000 | 300 | 0.75 | 1 | 60 | 22 |
| A1.10.E000R | 900 | 590 | 1.000 x 800 | 260 | 0.55 | 2 | 60 | 20 |
| A1.10.E010R | 900 | 800 | 1.250 x 800 | 260 | 0.55 | 2 | 60 | 26 |
| A1.10.E020R | 900 | 800 | 1.250 x 1.000 | 260 | 0.55 | 2 | 60 | 26 |
| A1.10.E030R | 900 | 1000 | 1.500 x 800 | 280 | 0.55 | 2 | 60 | 40 |
| A1.10.E040R | 900 | 1000 | 1.500 x 1.000 | 280 | 0.55 | 2 | 60 | 40 |
| A1.10.E050R | 900 | 1200 | 1.800 x 800 | 300 | 0.75 | 2 | 60 | 44 |
| A1.10.E060R | 900 | 1200 | 1.800 x 1.000 | 300 | 0.75 | 2 | 60 | 44 |
| A1.10.E070R | 900 | 1600 | 2.250 x 800 | 340 | 1.1 | 1 | 90 | 37 |
| A1.10.E080R | 900 | 1600 | 2.250 x 1.000 | 240 | 1.1 | 1 | 90 | 37 |
| A1.15.E010R | 1400 | 800 | 1.350 x 800 | 310 | 0.75 | 1 | 90 | 32 |
| A1.15.E020 | 1400 | 800 | 1.350 x 1.000 | 310 | 0.75 | 1 | 90 | 32 |
| A1.15.E030 | 1400 | 950 | 1.500 x 800 | 320 | 0.75 | 1 | 90 | 36 |
| A1.15.E040 | 1400 | 950 | 1.500 x 1.000 | 320 | 0.75 | 1 | 90 | 36 |
| A1.15.E050 | 1400 | 1200 | 1.800 x 800 | 330 | 1.1 | 1 | 90 | 24 |
| A1.15.E060 | 1400 | 1200 | 1.800 x 1.000 | 330 | 1.1 | 1 | 90 | 24 |
| A1.20.E010 | 1900 | 800 | 1.350 x 800 | 310 | 1.1 | 1 | 110 | 24 |
| A1.20.E020 | 1900 | 800 | 1.350 x 1.000 | 310 | 1.1 | 1 | 110 | 24 |
| A1.20.E030 | 1900 | 950 | 1.500 x 800 | 320 | 1.1 | 1 | 110 | 27 |
| A1.20.E040 | 1900 | 950 | 1.500 x 1.000 | 320 | 1.1 | 1 | 110 | 27 |
| A1.20.E050 | 1900 | 1200 | 1.800 x 800 | 330 | 1.1 | 1 | 110 | 37 |
| A1.20.E060 | 1900 | 1200 | 1.800 x 1.000 | 330 | 1.1 | 1 | 110 | 37 |
Notes:
- Load applied: evenly distributed.
- 360 degrees manual platform rotation
- Equipped with a manual block device to prevent unintentional rotation when lowered.
- Max 20 cycles per hour, one shift a day.
- Self-lubricating bushings on pivot points.
- Upper and lower position by mechanical stops.
- Hydraulic power pack inside the table provided with relief valve against overloading and compensated flow valve for controlled lowering speed.
- Electric equipment controlled by electronic system, with transformer and thermal protection.
Canada
United States
Brasil
Other Countries
Australia
PR Cina
India
Indonesia
Malaysia
Thailand
Vietnam
Singapore
Belgium
Finland
France
Germany
Italy
Netherlands
Luxembourg
Poland
Spain
Sweden
United Kingdom
French
Belgian
